AR450 Low Alloy Steel Ballistic Plates Smooth Surface High Mechanical

Product Details:
Place of Origin: China
Brand Name: VANFORGE
Certification: ISO9001:2015, ABS, BV, CCS, DNV GL, NKK
Payment & Shipping Terms:
Minimum Order Quantity: 5 metric tons
Price: Negotiable
Packaging Details: In bundles, standard seaworthy packing for export
Delivery Time: 15 days
Payment Terms: L/C, T/T
Supply Ability: 3000 metric tons per month

Detail Information

Material: Low Alloy Steel Process: Hot Rolled
Shape: Flat Plate Surface Treatment: Plain And Smooth
Length: Up To 12000mm Condition: Quenched And Tempered
High Light:

ar500 ballistic plates

,

armor plate steel

Product Description

AR450 quenched and tempered high strength bullet impact resistant armoured steel plate

 

High strength armored steel

 

AR450 ARMORED STEEL is an alloyed, high strength quenched and tempered steel with a resistance against bullet impacts and the effects of blast waves. It is preferably used for light weight armored vehicles. Due to its performance the steel is used by the customers for civil and military protection systems.

 

Product description

Range of application

AR450 ARMORED STEEL is an alloyed, high strength quenched and tempered steel, with a hardness range of 420 – 480HBW in the delivery condition.

 

AR450 ARMORED STEEL can be supplied in the following dimensions:

Thickness ≥ 6mm ≤ 25mm
Width ≥ 1,000mm ≤ 2,500mm
Length ≥ 3,000mm ≤ 8,000mm

On request, other dimensions can be agreed.

 

Chemical composition

For the ladle analysis, the following max. values in % are applicable:

C Si Mn P S Cr Ni Mo
0.25 0.50 1.60 0.015 0.005 2.00 2.50 0.70

 

Delivery condition

The plates are delivered in the quenched and tempered condition.

 

Mechanical and ballistic properties

Hardness

Brinell surface hardness at room temperature: 420 – 480 HBW

 

Tensile testing on transverse specimens at room temperature

Minimum tensile strength

Rm

[MPa]

Minimim yield strength

ReH

[MPa]

Minimum elongation

A5

%

1,250 1,100 10

 

Charpy-V impact test

AR450 ARMORED STEEL offers impact energy values KV2 of 35 J at -40 °C (longitudinal and transverse to the rolling direction).

The specified minimum value is the average of 3 tests. Only one individual value may be below the minimum average value specified, provided that it is not less than 80 % of that value.

For plate thickness below 12 mm the Charpy-V-notch test can be carried out on Charpy-V-test pieces with reduced width, the minimum size of the sample shall not be less than 5 mm. The minimum specified value decreases proportional to the reduction of the section.

 

Properties under ballistic impacts

The properties under ballistic impacts have to be agreed.

 

Testing and documentation

Determination of the mechanical properties in the delivery condition per plate as rolled in ¼ plate width in accordance with ISO 404. The hardness test is carried out in accordance with ISO 6506-1. The tensile test is carried out on flat rectangular, transverse specimens in accordance with EN ISO 6892-1.

The impact test will be carried out on Charpy-V-longitudinal and transverse specimens in accordance with EN ISO 148-1.

The test results are documented in a certificate 3.1 in accordance with EN 10204. A bullet resistance test can be agreed upon.

 

Identification of plates

Unless otherwise agreed the marking is carried out via perforated steel stamps with at least the following information:

• steel grade (AR450 ARMORED STEEL)

• heat number

• number of mother plate and individual plate

• the manufacturer’s symbol

• inspector’s sign

 

Processing

The entire processing and application techniques are of fundamental importance to the reliability of the products made from this steel. The user should ensure that his design, construction and processing methods are aligned with the material, correspond to the state-of-the-art that the fabricator has to comply with and are suitable for the intended use. The customer is responsible for the selection of the material. The recommendations in accordance with EN 1011 should be observed. The much higher tensile properties of the armored steel comparing to other steels covered by the standard can lead to a higher crack probability while processing.

 

Welding and flame cutting

The heat input during welding and flame cutting can lead to a decrease in hardness in a small area adjacent to or in the weld seam. This can have an impact on the bullet resistance properties of AR450 ARMORED STEEL. The manufacturer is advised to take this into account in his design.

 

Forming

The material can be formed by cold bending, in spite of its high hardness. It is recommended that the flame cutting or shearing edges in the area of the bend should be grinded. The bending speed must be adjusted by the fabricator to the geometry of the processed parts.

Due to the high strength values of AR450 ARMORED STEEL in the quenched and tempered condition the spring-back phenomenon has to be taken into account while cold forming. During the processing, the necessary safety measures have to be taken, so that nobody will be exposed to a danger by a possible fracture of the work piece during the forming process.

 

Heat treatment

AR450 ARMORED STEEL is delivered in a heat treatment condition which is ready for assembly. Subsequent heat treatment above 200 °C impairs its ballistic properties and is therefore not permissible.

 

Machining

AR450 ARMORED STEEL is suitable for machining. In view of its high delivery hardness a lower cutting speed must be anticipated.

 

Tolerances

Unless otherwise agreed the following tolerances apply:

For the thickness in the range of -0 / +0.8 mm, for the width in the range -0 / +12 mm.

Tolerances for the lengths are as follow, values in mm:

Length < 4,000 ≥ 4,000 < 6,000 ≥ 6,000 ≤ 8,000
Tolerance -0 / +10 -0 / +20 -0 / +25

Unless otherwise agreed, the flatness tolerances will be in accordance with EN 10029, table 4, steel group H.

Smaller flatness tolerances may be agreed upon request.

 

Surface quality

Unless otherwise agreed, the indications in accordance with EN 10163-2, class A3, apply. Higher requirements may be agreed upon request.

 

Surface protection

Upon request the plates can be shot blasted and / or primer coated with a product at the manufacturer’s choice.

 

Ultrasonic testing

Unless otherwise agreed, indications be in accordance with EN 10160, class S2/E2 apply.

 

General note

If particular requirements, which are not covered in this material data sheet, are to be met by the steel due to its intended use ore processing, these requirements are to be agreed before placing the order

 

 

Production process

AR450 Low Alloy Steel Ballistic Plates Smooth Surface High Mechanical 0

 

AR450 Low Alloy Steel Ballistic Plates Smooth Surface High Mechanical 1

 

 

Get in touch with us

Enter Your Message

You Might Be Into These