Umbilical Seamless Capillary Coiled Tubing Super Duplex Stainless 2507
|Place of Origin:||China|
|Certification:||ISO9001:2015, PED 97/23/EC|
|Model Number:||3/8'' OD x 0.065'' WT|
Payment & Shipping Terms:
|Minimum Order Quantity:||10000 feet|
|Packaging Details:||Level wound coiled on wooden spool, and wooden case packing|
|Delivery Time:||10 days (for our required MOQ)|
|Payment Terms:||L/C, T/T|
|Supply Ability:||150000 meters per month|
|Material:||Super Duplex S32750 Comply With NACE MR0175/ISO15156||Tube Type:||Seamless|
|Condition:||Bright Annealed||Length:||Up To 10000 Meters Long Per Reel|
|Qualification:||Hydrostatic Tested||Application:||Oil And Gas Fields|
|Surface:||Metallic Bright||Specialty:||High-pressure Hydraulic|
annealed stainless steel tubing,
stainless steel coil tubing
Super Duplex S32750 Seamless Steel Pipe , Seamless Hydraulic Tubing
Duplex S32750 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance. Alloy S32750 has 25% chromium, 4% molybdenum, and 7% nickel. This high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking.
Usage of S32750 should be limited to applications below 600° F (316° C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy S32750.
Duplex S32750 possesses excellent mechanical properties. Often a light gauge of S32750 material can be used to achieve the same design strength of a thicker nickel alloy. The resulting savings in weight can dramatically reduce the overall cost of fabrication.
● High resistance to chloride stress corrosion cracking
● High Strength
● Superior resistance to chloride pitting and crevice corrosion
● Good general corrosion resistance
● Suggested for applications up to 600° F
● Low rate of thermal expansion
● Combination of properties given by austenitic and ferritic structure
● Good weldability and workability
Super Duplex Stainless S32750, Chemical composition
Application: Super duplex alloy combining excellent strength with good corrosion resistance in high chloride and seawater environments
Tensile strength, min.: 116ksi (800MPa)
Yield strength, min.: 80ksi (550MPa)
Elongation in 2 in., min.: 15%
Hardness, max.: Brinell 310, or Rockwell C 32
HYDRAULIC CONTROL AND INSTRUMENTATION APPLICATIONS
STAINLESS STEEL AND HIGH NICKEL ALLOYS COILED TUBING SOLUTIONS
MEILONG is an important manufacturer in premium coiled seamless & welded tubular solutions for oil and gas applications. In an endeavor to increase its presence in subsea, MEILONG has extended its offer by developing a highly innovative tubular solution for umbilical projects.
MEILONG has developed a strong and unique expertise in premium quality tubes to answer the most stringent specifications of its customers. Based on this expertise in high pressure, and extremely high pressure tubes, MEILONG’s state-of-art factory is exclusively dedicated to the manufacturing and supply of super duplex and high nickel alloys tubes for corrosive downhole applications and is now ready to offer the highest specifications for your toughest challenges.
S32750 Duplex is highly resistant to uniform corrosion by organic acSuper Duplex S32750 Plateids such as formic and acetic acid. It is alsohighly resistant to inorganic acids, especially if they contain chlorides. Alloy S32750 is highly resistant to carbide-related intergranular corrosion. Due to the ferritic portion of the duplex structure of the alloy it is very resistant to stress corrosion cracking in warm chloride containing environments. Through additions of chromium, molybdenum and nitrogen localized corrosion such as pitting and crevice attack are improved. Alloy S32750 has excellent localized pitting resistance.
Standards and Specifications
Tubing Specification PTM-TS-011, Duplex Stainless 2507 Tubing for Control Line Applications
ASTM A789, Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
All Super Duplex Stainless 2507 control line tubing offered by MEILONG are made from a controlled-chemistry. Super Duplex Stainless 2507 material with minimum pitting resistance equivalent (PRE) value of 42.5
Capillary String Size
|Imperial size||Metric size|
Tubing length up to 32,808 feet (10,000 m)
For control line, chemical injection line, umbilicals
Dimensional tolerances: ASTM A632 standard is used to define permissible variation in tubing wall thickness and diameter.
Variation in tubing diameter:
+0.003’’ is permissible for tubing below 0.188’’ diameter and
+0.004’’ is for tubing above 0.188’’ nominal diameter
Variation in wall thickness: For both seamless and welded tubing +10/-10% deviation is acceptable
No negative tolerance permitted on the variation on length measurement
Orbital welds: Each one reel of tubing is a continuous length without orbital butt welds
Pressure rating: The pressure rating shall be specified on the PO.
Material quality: The material shall be free of injurious seams, laps, longitudinal and transverse notches or other imperfections, which due to their nature will interfere with the use of the material I final usage of the part.
Pressure testing: Each coil of tubing shall be hydrostatically pressure tested at its maximum rated test pressure (specified in purchase order or the supplied test pressure rating table) for a minimum of 15 minutes. The test pressure of the tubing shall be reported on the certification.
Welded & Redrawn Tubing
Strip splice welds join lengths of cold rolled strip to enable long lengths between orbital welds (greater than 14,500 ft between orbital welds is achievable). The strip is formed into a tubular cross section and longitudinally seam welded using the gas tungsten arc (GTAW) process. The tubing is first sunk to an intermediate outside diameter, heat treated, and make the same process to obtain the desired size.
Seamless & Redrawn Tubing
Seamless extruded tube hollows are drawn or drawn / sunk to final size to produce seamless tubing coils 500 to 2,000 ft. long, depending upon the size. The tubing is heat treated and joined by orbital welding to achieve the desired length. The final material condition of the tubing is heat treated.
Super Duplex Stainless S32750 material provides excellent corrosion resistance in chloride-containing environments.
All Super Duplex Stainless S32750 control line tubing offered by MEILONG are made from a controlled-chemistry. Super Duplex Stainless 2507 material with minimum pitting resistance equivalent (PRE) value of 42.5
Size include 1/4’’, 3/8’’, 1/2’’, 5/8’’, 3/4’’, and 1 in. outside diameter.
Tubing nominal wall thickness meets ASTM A-789
Tube markings include size, material type/grade, specification, heat number, and other information.
Eddy current test (ECT)
Chemical composition analysis
Dimension & visual inspect
Available Material Grades
ASTM A213 A269
ASTM A213 A269
|EN 10216-5 TC1||TP316Ti||S31635||1.4571|
ASTM A213 A269
|ASTM B423||Alloy 825||N08825||2.4858|
|ASTM B444||Alloy 625||N06625||2.4856|
|ASTM B165||Alloy 400||N04400||2.4360|