450HBW Structural Steel Plate Low Alloy Steel High Hardness Full Hard
|Place of Origin:||China|
|Certification:||ISO9001:2015, ABS, BV, CCS, DNV GL, NKK|
Payment & Shipping Terms:
|Minimum Order Quantity:||5 metric tons|
|Packaging Details:||Standard seaworthy packing for export|
|Delivery Time:||15 days|
|Payment Terms:||L/C, T/T|
|Supply Ability:||3000 metric tons per month|
|Material:||Low Alloy Steel||Process:||Hot Rolled|
|Shape:||Flat Plate||Surface Treatment:||Plain And Smooth|
|Length:||Up To 12000mm|
structural steel sheet,
hardened steel plate
The high-strength structural steel at 650 MPa
S650MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 650 MPa for stronger and lighter structures.
S650MC meets or exceeds the requirements in EN 10149-2.
Typical applications include a wide range of components and parts, such as demanding load-bearing structures. S650MC comes in coils, slit coils or cut-to-length sheets.
S650MC steel is available in thicknesses of 2.00-10.00 mm and widths up to 1600 mm as coils, slit coils or cut to length sheets in lengths up to 16 meters.
Yield strength ReH (1)(2)
Tensile strength Rm
Elongation A80 (3)
|Min. inner bending radius for a 90 ° bend (5)|
|2- 3||650||700- 850||12||14 (4)||0.8 x t|
|3.01-6||650||700- 850||14||1.2 x t|
|6.01- 1||650||700- 850||14||1.5 x t|
The mechanical properties are tested in the longitudinal direction.
(1) If ReH is not applicable then Rp 0,2 is used.
(2) On thicknesses >8 mm the minimum yield strength may be 20MPa lower.
(3) A80 value applies for thicknesses < 3.00 mm.
(4) A5 value applies for sheet thickness t ≥ 3mm.
(5) For both longitudinal and transverse direction.
|Grade||Min. impact energy for longitudinal testing, Charpy V 10x10 mm test specimens|
|S650MC D steel||40 J/-20 °C|
|S650MC E steel||27 J/-40 °C|
Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.
Chemical Composition (ladle analysis)
|C||Si (1)||Mn||P||S||Al||Nb (2)||V (2)||Ti (2)|
(1) If the material is to be hot-dip galvanized according to category A or category B in EN 10149-2 this must be specified at the time of order. Other galvanizing classes with higher Si-content are available after agreement.
(2) Sum of Nb, V and Ti = max 0.22%
The steel is grain refined.
Tolerances according to EN 10051.
Length and Width
Width and length tolerances according to EN 10051. Length tolerances only apply for cut to length sheets.
Tolerances according to EN 10051. Narrower tolerances are available on request.
Tolerances according to EN 10 051.
Flatness guarantees only apply for cut to length sheets.
According to EN 10 163-2 Class A, Subclass 3.
Thermomechanically Rolled. S650MC steel is available in as rolled or pickled surface condition with mill or cut edge.
Fabrication and Other Recommendations
Welding, bending and machining
S650MC steel has good welding, cold forming and cutting performance.
S650MC steel is a cold forming steel not suited for heat treatments at temperatures above 580 °C since the material then may lose its guaranteed properties.
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.
Plate thickness: 4-100mm
Width: 500mm – 4700mm
Length: On request